Curepod for your Cannabis Facility

The CūrPod System is a hermetically sealed enclosure with a stainless steel base and a clear molded cover that sits in a channel for perfect sealing.  It has a capacity for approximately 20 pounds of product in four standard 15.5 x 23.5 x 7.75 inch plastic crates.  


Each pod is self-contained with built in Oxygen, Carbon Dioxide, temperature and Relative Humidity sensors with digital communications to a central operating panel.  Built in control valves and gauges regulate the connected Nitrogen, Air, or CO2 supply to accurately maintain the programmed levels. A patent-pending respiration technology automatically indicates dry and cure status.



Patent-Pending Dry Cure Status using Respiration Data Expands on Our Patented Technology - 
U.S. Patent No. 8739694, Canadian Patent No. CA2746152 for Large Dry Rooms
Self-Contained Control of Low O2 Atmosphere
for Long Term Holding
Built-In High-Resolution Gas Analysers
Automatic Operation & Full Data Recording
Moisture Sensors for Precise & Consistent Moisture Content in Final Product (Coming Soon)
Hydrate Dry Product
Introduce Terpenes

Breakdown chlorophyll and sugars, not terpenes More time growing; less time curing
Reduce microbial contamination
Increase average cost per pound
Easily maintain fresh drop flavor for up to 12 months Consistent cure process


Oxygen: 0-25% or 0-2.5% Auto range   Resolution: low range +/- 0.002% O2   Electrochemical 4-year long life sensor
Carbon Dioxide: Two options at purchase, 0-50000 ppm or 0-20% CO2   Resolution: < 5%   0.002%  >5% 0.02%
Control Gases required: Nitrogen with an oxygen content lower than minimum required CA Oxygen.
Fresh Filtered Air.  CO2 if required.  Gas supply inlet pressure 1 to 3 Bar (15 to 50 psi )
Automatic atmosphere control with included solenoids.
Control Setpoints for Oxygen and CO2 adjustable to a 0.01% resolution. Gas control differentials 0.05%, CO2 add differential 0.2%.
Air added when Oxygen is measured low:  Air flow adjustable 0.1 to 1 L/min 
Nitrogen added when Oxygen is measured high or when CO2 is high. Adjustable flow 0.2 to 2 L/min
CO2 (if connected) added when CO2 is low. Adjustable flow 20 to 200 mL/min.
Additional flow rate adjustable from controller from 100% to 1%  of maximum flow over a 5 minute period.
CO2 scrubber for CO2 control.
Descant tube for Humidity Control.
Automatic frequency of measurement, adjustable from 10 to 999 hours   
ON when control gases being added. With no gas addition, adjustable over range 1 to 299 seconds every 300 seconds. 
Probe with a typical accuracy of 0.1°C available for measuring and recording the product temperature

Zero stability typically better than 0.05% over 12 months
Automatic barometric pressure compensation for span calibration 
Remote calibration possible from operating panel.
Sampling port available for atmosphere sampling with a portable standard analyser and for Ethylene and volatile measurement
The flow of correction gases into the CūrPod are automatically discharged to atmosphere through a vent.  
One multicore cable for CAN data connection and 24v operational power. Connector & wall mounted termination box provided with each LabPod.
5.7inch touch screen display. Capacity for up to 32 CūrPod connections. 24v power supply for the system included in Panel. 
Additional power supply needed for greater than 16 CūrPods. The controller has a standard Ethernet connection with a dedicated IP address. Remote client and PC software provided for PC operation.
Continuous readout of gas and temperature and operational status. Access to all control settings. Remote analyser calibration protected with a passcode.  Settings for empty volume and product weight for respiration rate calculations 
O2, CO2 and temperature recorded every hour together with most recent RQ and respiration results. Results stored on CF card in PLC and on hard disk of connected PC. Can be displayed on PC in Graphical and tabular formats and exported in various formats including Excel, Word and pdf.
Oxygen at typically 1% in a static LabPod (no produce, no correcting gas) will remain within 0.1% O2 over a period of 24 hours.
135 x 84 x 70 cm high   Weight 46 Kg.   Empty volume 379L  Pull down time to 2% Oxygen with N2 at 5 L/min is 4 Hours.
Capacity:  4 x RPC crates (Typical Single RPC size: 40 x 60 x 20 cm, 17 Kg capacity)

GC - Curepod

SKU: ICE10088
  • Don't Forget!

    The I.C.E. team can help you source any Cannabis or Hemp production equipment that meets your needs even if that equipment is not listed on our site! Contact us at anytime to have us source your equipment and deliver to your site anywhere in the world.

  • Pricing

    Contact the I.C.E. team for pricing. We have access to discounts in addition to cost savings based on bulk orders.

  • Shipping

    All prices do not include applicable taxes and shipping costs. Contact Us to calculate shipping costs directly to your door

  • I.C.E Review

    Coming Soon!

  • Did You Know?

    Given the research findings, it is possible that Shakespeare was quite high when he wrote the romantic sonnets and other literary works that are still considered masterpieces by many people. If so, then the connection between creativity and cannabis consumption may just have gotten a bit stronger.

  • Team of Experts

    The I.C.E. Store is proud to be partnered with many great industry professionals and services allowing us to review products, understand the needs of the global Cannabis industry and to allow us to provide unsurpassed services in the industry. Just contact us and we'll handle the rest!

Looking for a Secure CrptoWallet?

Proudly Built on the Ethereum Block Chain




Worldwide security & risk management consulting for Cannabis and Hemp ventures.


Worldwide Cannabis & Hemp venture application and production consulting

Facility layout & design consulting for any Cannabis and Hemp venture anywhere in the world.


Cannabis & Hemp venture build out and expansion capital sourcing anywhere in the world.


Don't See Your Desired Product?

Contact Us to help you source any equipment you don't see listed on our site.


Due to price volatility, international exchange rate updates, fluctuating material costs and shipping cost changes based on a variety of factors, we have chosen to not include equipment pricing on this site.


Since the I.C.E. team has developed fantastic relationships within the worldwide Cannabis industry, we have access to up-to-date pricing on all Cannabis production related products. We encourage you to Contact Us for your equipment requests to ensure we offer you the best equipment at the best price! 

  • Facebook
  • Twitter
  • YouTube
  • Pinterest
  • Instagram

©2020 by Industrial Cannabis Equipment